The raw material belt manufacturer tells you the points of attention in use
2020-08-24 16:55:42
Is the water seepage in the raw material belt normal?
unusual. The raw material tape is wound on the thread in the water pipe. If the winding method is not correct, it is easy to seep water. In addition, if the winding is too much or too tight, water will leak, which means that the threads between the pipes are not matched or the gap is too large and needs to be replaced. ,,,,,,,,, ...
What is the role of raw meal
1. It can be used in the joints between pipelines to enhance the sealing effect and prevent water leakage. It is often used in the chemical, electronic engineering, water treatment and plastic industries. The raw material belt can be extruded or compressed, and can be made into water dispersion, which can be used for coating or made into fibers, and is suitable for electrical, aerospace, instrumentation, textile, construction and machinery industries.
2. The raw material belt is environmentally friendly, non-toxic, and harmless to the human body, but it will form toxic gas when burned, so you need to pay attention when using it. The raw material belt is very tough, has excellent corrosion resistance, does not absorb water and is not easy to burn, is very stable to oxygen and ultraviolet rays, and has excellent weather resistance. It has a very wide range of applications.
What should be paid attention to when winding raw material tape
Note that the direction can not be wrong, its direction is the same as the direction of the water pipe texture, but it should not be wrapped too full, because the sealing effect will be reduced after the raw material tape is inserted into the pipe. The correct way is to start winding from the position of the second thread and free the first thread. In addition, pay attention when winding, and use it to tighten without breaking.